Free worldwide shipping
Free returns
Carbon neutral
Secure payments
It's a high efficiency spring pump that makes slices, juliennes and dice cuts - thicknesses from 0.5mm to 8.0mm.
The unit is safe as all the blades are fully covered.
Once the feet have been opened, you can remove the storage lid by pulling up on the locking button.
Install the feeder by placing its bottom edge (straight and serrated side) first and then locking it into place by snapping in the top part.
Unlock the spring pump by pressing down on the handle while exerting a slight rotation. The pump will deploy and the blades will move upwards.
Place the container under the appliance and insert the pusher inside the feeder. The Pump'n'Slice is now ready to use.
To activate the Julienne blades, lift the tab 1 or 2 90 degrees from its base. Rotate the tab a full turn and snap back onto its base.
If one tab is activated (#1) one row of Julienne blades is activated. Perfect for thicker cuts.
If both tabs are activated (#1 and #2) you will get two rows of blades. Perfect for thinner cuts.
loading