5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Ported
Audio Output Mode
Stereo
Mounting Type
Floor Standing
Enclosure Material
Metal, Plastic, Wood
Speaker Type
Woofer
Additional Features
Durable, Lightweight, Full Metal Grill, Recessed Handles
Antenna Location
Playing bass guitar
Subwoofer Diameter
10 inches
Is Waterproof
FALSE
Warranty Type
Limited
Control Method
Touch
Speaker Size
10 inches
Woofer Diameter
10 inches
Specific Uses For Product
Musical performances, recording studios
Controller Type
Voice control
Frequency Response
45 hertz
Number of Audio Channels
2
Impedance
8 ohm
Compatible Devices
Laptop, Desktop
Compatible with Vehicle Type
Car
Power Source
Corded Electric
Model Number
SA-410
Model Name
SA-410
Built-In Media
a 4x10 bass speaker cabinet
Warranty Description
One year manufacturer defect and labor.
Number of Items
1
UPC
812451012408
Global Trade Identification Number
00812451012408
Manufacturer
Seismic Audio Speakers, Inc.
Speaker Maximum Output Power
800 watts
Item Dimensions D x W x H
18"D x 28"W x 29"H
Connectivity Technology
Coaxial
Subwoofer Connectivity Technology
Wired
Connectivity Protocol
1/4" audio cable
Audio Driver Type
Dynamic Driver
Audio Driver Size
10 inches
Speakers Maximum Output Power
800 watts
Seismic Audio 4x10" Bass Guitar Cabinet
Great for studio or live performances. Whether you have a permanent installation or mobile, this bass guitar speaker cabinet is rugged enough to handle whatever you throw at it - road ready and built to last. The quality of your sound can only be as good as your equipment and this bass guitar cabinet should not be overlooked. Each cabinet contains four 10" woofers with a 50 oz. magnet and 2" Kapton voice coil each, wired at 8 ohms. This configuration crystal clear sound while rejecting extraneous noise. Each cabinet is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners. These features along with the recessed handles and full metal grill make this cabinet fit right in with your other professional equipment on stage. Awesome quality dual speaker cabinets are very hard to find, especially when low on cash. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. With your purchase, you will receive a 4x10" bass guitar cabinet pictured and described above. So, grab one today and get ready for years of trouble-free, punchy bass sound!
SA-410
Brand New 4x10" Bass Guitar Cabinet
This listing is for a 4x10" passive bass guitar cabinet pictured and described above. The dual-ported SA-410 provides great low-end reinforcement along with great articulation in the mid range. Loaded with four of our 10" woofers, and at 8 ohms, the SA-410 packs a powerful punch! At 400 Watts RMS, the SA-410 makes for a great smaller rig or couple this with our dual 15” bass cabinet to give you some serious low end!
SPECIFICATIONS
Model #: SA-410 (8 Ohms)
Woofers: Four 10" - each has a 50 oz. magnet with a 2" Kapton voice coil
400 Watts RMS, 800 Watts Peak
Sensitivity: 96 db
Cab Dimensions: 26" x 26" x 15"
Terminal cup with two 1/4" inputs
5/8" plywood front panel and black carpet with black metal corners w/ full metal grille
Weight: 73 lbs. per cabinet
FEATURES
Jack Plate & Inputs
Our SA-410s are outfitted with heavy-duty jack plates that house two 1/4" inputs enabling this speaker cabinet to be easily daisy-chained and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio.
Protective Hardware
Heavy-duty, rugged hardware protect our SA-410 cabinets with a fully metal grille on front, heavy-duty metal corners, and thick, durable rubber feet.
Heavy-Duty Recessed Handles
In order to transport your speaker cabinets easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.