Free worldwide shipping
Free returns
Carbon neutral
Secure payments
| Gauge | 0.04 |
|---|---|
| Chain Type | Semi-Chisel |
| Unit Count | 3 Count |
| Item Length | 4 inches |
| Chain Length | 4 inches |
| Manufacturer | KAKEI |
| Model Number | 4" 1/4" .043" 28DL- German Steel *3 |
| Item Type Name | Chainsaw chain |
| Number of Items | 3 |
| Number of Packs | 3 |
| Drive Link Count | 28 |
| Compatible Devices | STIHL GTA 26 |
| Included Components | 3 x Premium German Steel Saw Chains |
| Manufacturer Part Number | 4A4Q28X3 |
Chainsaws can be equipped with different guide bars. When selecting a chain for your chainsaw, in addition to the model and length, make sure that the pitch, gauge and number of drive links are correct. You can usually find them on the guide bar side stamp or in the owner's manual.
In addition, you are more than welcome to contact KAKEI Customer Support on Amazon with your chainsaw/guide bar part number and we are always ready to help you.
| Bar Length | 4" (Visit KAKEI store for all 4 inch chainsaw chains) |
| Pitch | 1/4" LP |
| Gauge | .043" |
| Drive Links | 28 |
| Chain Type | Semi-Chisel |
| Safety | Low Kickback |
| Narrow Kerf | No |
| Material | Premium German steel (68CrNiMo, GCr15) |
| KAKEI Part Number | 4A4Q28X |
STIHL
GTA 26
For most of the saw chain components, KAKEI uses 68CrNiMo GCr15 imported from Germany, the same raw material used by STIHL, which creates a higher cutting capacity.
Extends the chain life by delivering lubricant to key parts of the chain, reducing downtime and maintenance and increasing efficiency.
All cutters are electroplated with the industrial hard chrome for better sharpness and longevity.
KAKEI hardens and quenches all rivets to improve its strength for fewer chain tension adjustment.
In this era of globalization, KAKEI has managed to provide our customers with the Quality& Cost-effective products, which is why KAKEI is trusted by customers all over the world.
World-class Production Technology and Equipment
World-class Production Technology and Equipment
World-class Production Technology and Equipment
How to tighten chainsaw chain properly?
1. Disengage the chain brake 2. Loosen the bar nuts 3. Lift the tip of the guide bar 4. Tighten the tensioning screw until the chain sits snugly against the bottom rail of the bar without slack and still rotates freely 5. Re-tighten the bar nuts
How to reduce the risk of kickback?
If you are not experienced with chainsaws, use a low kickback chain (ANSI standard). Also, never saw using the "kickback danger zone" on the guide bar (the top of the bar tip); use the underside of the bar instead.
What is ANSI?
The safety standard "B175.1" set by the American National Standards Institute (ANSI), which outlines requirements for gasoline-powered chainsaws (chains), including provisions designed to reduce the risk of kickback injuries when cutting wood.
How often should chainsaws be lubricated? Should I use a special lubricant for chainsaws?
- Fill the reservoir with lubricant every refueling and ensure the lubricant is properly delivered to the chain during operation. Improper lubrication can cause excessive wear, reduce cutting efficiency and increase the risk of chainsaw damage
- Yes
Full Chisel vs Semi-Chisel Chain – What's the difference?
Full chisel: sharper and cuts faster, but tends to dull when it encounters dirt and is prone to kickback.
Semi-chisel: cuts slower than full chisel, but stays sharp longer, suitable in dirty environments.
loading
