Free worldwide shipping
Free returns
Carbon neutral
Secure payments
| Color | white |
|---|---|
| Material | Metal, Nylon, Polyvinyl Chloride |
| Unit Count | 1 Count |
| Model Number | B09YD4VWK5 |
| Power Source | Corded Electric |
| Material Type | Metal, Nylon, Polyvinyl Chloride |
| Power Source Type | Corded Electric |
| Included Components | Two Blower (550W+480W), Needle, Thread, Large Size Nail for Fixing, Nylon Rope, Mending Cloth, Reinforced Oxford Cloth Sandbag |
| Recommended Uses For Product | Painting |
The booths of many brands are only equipped with single-layer activated carbon filter, which can only filter the peculiar smell, and basically has no filtering effect on the overspray. Overspray cannot be directly discharged into the air, which will cause air pollution and even complaints from neighbors. When the overspray is discharged indoors, it will adhere to all indoor items and is difficult to clean.
GORILLASPRO booth is equipped with multi-layer filter (EPA register filter + activated carbon filter) to effectively filter the overspray. After discharge, it will not cause air pollution and can maintain a healthy indoor and outdoor environment. We also provide separately sold EPA registered filters and activated carbon filters for you to replace. You can change the filters regularly to achieve the best filtering effect.
The filtration efficiency of the booth depends on the power and flow of the blower. When the blower inflates, the air pressure inside the booth is higher than that outside, forming a continuous exchange of air. Simply increasing the number of filters without increasing the blower will not improve the filtration speed. This will only reduce the air pressure inside the booth and prolong the residence time of overspray inside. When replacing the filter, it will cause huge economic costs and difficulties, and waste you more money.
GORILLASPRO booth adopts a more scientific design, and the fresh air is poured into the booth through an independent air inlet blue pipe. Maintain a reasonable air pressure difference between the inside and outside of the booth, realize rapid air exchange, improve the filtration efficiency, and save the cost of replacing the filter.
Booths of other brands do not provide suction devices for indoor use. Overspray is directly discharged indoors, causing serious air pollution and will be attached to various indoor items. In addition, the overspray will enter the booth again through the blower, making the filtering system of the booth completely ineffective.
GORILLASPRO provide special accessories for indoor use - Overspray Diversion Suction Device. The device can greatly improve the filtration efficiency by connecting the external extraction fan and explosion-proof pipeline. Solve the problem of air circulation inside the booth, reduce the residence time of overspray, and guide the waste gas to the outside. The device contains a built-in filter box, which can conduct secondary filtration of waste gas and minimize the discharged pollutants.
This device can be connected with an exhaust fan to provide aerodynamic power for the booth. Improve the air circulation speed and reduce the residence time of overspray inside the booth. When the booth is used indoors, the device is connected with an extraction fan and an explosion-proof pipe, which can lead the discharged gas to the outside and protect the indoor air health. (Patented products, counterfeiting must be investigated)
All GORILLASPRO booths adopt real multi-layer filters (EPA registered filter + activated carbon filter) to absorb overspray and peculiar smell to the greatest extent, so as to ensure that the discharged gas does not pollute the environment. GORILLASPRO also provide EPA registered filter + activated carbon filter sold separately. You can buy and replace the filters regularly to achieve better filtering effect.
GORILLASPRO booth provides better performance UL certified blowers. Under the same wattage, the wind power is more sufficient, the performance is more stable and the service life is longer. All gorilla booths are equipped with a second intake pipe. We offer replacement blowers sold separately. You can buy a second blower to improve the filtration efficiency of the booth. Please rest for 2 hours after the blower has been used for 8 hours.
When using the booth indoors, please install a special suction device for the GORILLASPRO booth. Connecting the device with the extraction fan and explosion-proof pipe can quickly suck out the overspray and reduce the residence time of the overspray in the booth. At the same time, the discharged polluted gas is discharged outdoors to keep the air in the indoor space clean. There will be no over spray flooding the room. The device has a built-in filter box, which can filter the discharged waste gas again to avoid air pollution.
This device perfectly matches all sizes of the GORILLASPRO booth and can be pasted on the filters on both sides of the GORILLASPRO booth. When the booth is used outdoors, the exhaust fan can be connected through this device to provide aerodynamic power for the booth. Improve the air circulation speed of the spray tent and reduce the residence time of the over spray inside the booth.
The booths of many brands are only equipped with single-layer activated carbon filter, which basically has no filtering effect on overspray. When the booth is used indoors, overspray will circulate indoors, causing indoor air pollution and adhering to indoor items. And will enter the booth again with the blower.
GORILLASPRO inflatable paint booth is loved by many customers and auto bloggers with its professional design and perfect quality. There are many review videos about the GORILLASPRO booth shot by bloggers on YouTube, and the cumulative viewing volume exceeds millions.
Notice Before purchase
1. The booth is not rainproof or waterproof. Please do not use it in rainy days, windy days, snow days and other bad weather.
2. The inflatable blower must be continuously energized to keep the booth inflated
3. The booth is made by the sewing process.The air leak at the seam is necessary because the product needs to be inflated with a constant airflow by blower, and this air leak is needed to stop the product from over-inflating.
4. Indoor use must be equipped with air draft ventilation device.
Precautions for use:
1. Keep the booth away from sharp objects such as knives, branches, and sharp rocks to avoid cutting the booth.
2. When a vehicle or heavy object enters the booth, do not crush the zipper repeatedly to avoid damage
3. When it is windy outside, the booth should not be fixed on fixed points that cannot be moved (such as expansion screws on the concrete floor).
4. Please be careful when using electricity in the booth.
5. When painting, please away from the open flame and keep all heating tools away from the booth fabric
6. When partially painting your car, please completely cover the areas you don't need to paint
7. The booth should be cleaned up and dried before storage. Stored it in a cool and ventilated place.
loading
