Free worldwide shipping
Free returns
Carbon neutral
Secure payments
| Color | Black |
|---|---|
| Material | Iron |
| Set Name | Spanner Wrench & Magneto Flywheel Puller Set (2 Piece) |
| Head Style | C Shaped |
| Unit Count | 1 Count |
| Item Length | 11.5 inches |
| Item Weight | 700 g |
| Finish Types | Powder Coated |
| Jaw Capacity | 4.3 inches |
| Manufacturer | EUICAE |
| Model Number | A0010 |
| Material Type | Iron |
| Operation Mode | Mechanical |
| Number of Items | 2 |
| Number of Packs | 1 |
| Package Quantity | 1 |
| Measurement Standard | Metric, SAE |
| Manufacturer Part Number | A0010 |
| Spanner Wrench Hook Depth | 9 millimeters |
| Spanner Wrench Pin Length | 0.35 inches |
Spanner Wrench:
Pins:
Our spanner wrench is made of high-quality iron, which is not easy to bend.
With good manufacturing, fine workmanship and in reliable quality, it is durable and strong.
Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots.
Used to fix, install, disassemble, screw and unscrew any accessories or part on a vehicle in the proper size.
Fit any bike, motorbike, moped and scooter.
Great for scooter clutch, trim cylinder, motorcycle flywheel, hydraulic gland, transmission gear, variator, hub, etc.
Of course. With one spanner wrench, repair will become much easier! You can say goodbye to a pair pliers and free your two hands!
Our spanner wrench is made of solid iron instead of stainless steel, because stainless steel is less strong and easy to bend, which cannot bear strong forces.
Iron performs better under extreme pressure.
Our spanner wrench will not rust if you put it in a dry place after use.
No. All the parts of our spanner wrench are made of solid iron and strongly connected.
Every piece of product has been carefully checked before packaging.
Puller Size: 24mm& 27mm.
24mm right hand thread for GY6 50cc 4 Stroke Scooter Moped ATV;
27mm left hand thread for GY6 125 150cc Scooter 125cc Motorcycles.
· Does this Flywheel Puller fit for my motor?
You’d need to measure the head of the bolt or the flywheel nut to make sure.
Steps:
1.Take any plastic housing over the flywheel off
2.Look at the center of the flywheel.
3.If it is threaded or has grooves inside your flywheel, this will almost certainly fit it.
· What is the thread pitch for?
The thread pitch for both the 24mm side and the 27mm side is 1mm.
loading
