4-Channel Speaker Switcher Selector Box with Terminal Claps 200W RMS Max 100W Switchable, Black

$14.85 USD
Shipping fees will be calculated at checkout.
  • Free worldwide shipping

  • Free returns

  • Carbon neutral

  • Secure payments

  • Enables two or four pairs of speakers to be connected to the stereo output of an amplifier
  • Each pair can be selected individually or both together
  • Heavy-duty rocker switches
  • Works with speakers from all sizes 4 6 8 12 inch
  • Manufacturer Warranty: 12 months
Connector Type Used on CableScrew Terminals
Compatible DevicesSpeaker
Cable TypeRCA, Speaker Wire
Number of Ports4
Audio Output ModeStereo
Color4-ZONE SPEAKER SWITCH
Unit Count1 Count
ManufacturerA ADWITS
UPC653846381798
Connector TypeScrew Terminals
CableRCA, Speaker Wire
M
1
2

Specifications:

  • Input end: 1x amplifier / speaker Stereo audio input
  • Output end: 4x speakers Stereo audio output (can be output independently)
  • Input interface: Stereo signal left and right channel audio signal input terminal x2
  • Output interface: 3D left and right channel audio signal output terminal x4
  • Power: Each channel maximum is 200W RMS
  • Impedance: Compatible 4Ω / 8Ω / 16Ω amplifier and speaker
  • Dimension: 23.3 (L) x 8.5 (W) x 3.5 (H) mm

3

● For whether your cable is compatible with the speaker selector. Be sure to use a compatible cable. You can only connect bare cables. Pin plugs, banana plugs, 3.5mm plugs and 4.4mm plugs cannot be connected.

4

Press the speaker cable port clip a little

Once the cable is inserted, the clip can be released and the cable can be clamped. This operation is easy, so do not force on the port clip to prevent damage and loosening

5

The bottom four corners have anti-slip cushions, do not slide when placed stably in any plane

6

This product is smaller than Ipad, is portable and requires little space.

● Please note:

However, this speaker switch can be connected to a 4Ω / 8Ω / 16Ω amplifier with speakers. But customers still need to pay attention to the match between the amplifier and the speaker. Example: If the amplifier is used with 8Ω and 4Ω speakers, the output power of the amplifier is about twice that of the speakers. At this point, the customer needs to control the volume on both sides, ie the volume setting should not be too high. Don't suddenly increase the volume to avoid damaging the speakers. We are not responsible for amplifiers or speakers malfunctioning for this reason.

Example title

Recently viewed

Cart

loading