How to Install?
Step 1: (Reference Setup Guide)
Install the hour hand and minute hand on the back side, then remove them and install them on the front side.
Step 2:
Install the battery positive pole first, the negative pole will turn up. Then press down hard. Watch needle rotation means that the installation is normal.
Step 3:
1. Nail a nail into the wall, hang the clock plate on the nail.
2. Fixed drawings, determine the location point.
3. Stick the numbers at the right site according to the location point.
4. Press the clock hands into the clock axle and point at 12 o'clock, adjust the time.