Free worldwide shipping
Free returns
Carbon neutral
Secure payments
| UPC | 855849005026 |
|---|---|
| Unit Count | 128 Fluid Ounces |
| Global Trade Identification Number | 00855849005026 |
| Number of Items | 1 |
| Included Components | Tools |
| Item Type Name | Concrete Densifier |
| Manufacturer | Ghostshield |
| Model | 4500 |
| Part Number | 4500 |
| Water Resistance Level | Not Water Resistant |
| Item Form | Liquid |
| Compatible Material | Concrete |
| Style Name | Lithi-Tek 4500 |
| Color | Solid Black |
| Surface Recommendation | Basement, Wall, Floor, Driveway, Patio |
| Material Type | Lithium Silicate |
| Material | Lithium Silicate |
| Style | Lithi-Tek 4500 |
All-in-one primer, densifier and hardener — the first layer of concrete fortification.
Super strength — unparalleled durability and toughness provided by freak science — where most superhero stories start. Let, it's the most advanced, lithium-based concrete densifier available, resulting in better abrasion resistance and crack prevention than sodium-based alternatives.
Easily applied with a sprayer, roller or brush, the 4500 can be used on a variety of poured concrete substrates. Can be used indoors and outdoors but a sealer is recommended to be used in conjunction if concrete will not be polished. A popular choice to prime and harden new and old concrete.
Use stand-alone as a primer for polishing or as a primer for other sealers to increase adhesion. Provides a flat, natural finish. (Concrete appears shiny in this image because it was polished after using the 4500). Dries within a few hours of application and requires only a single treatment.
Leaves a clear, natural, invisible finish.
Applied in one coat with a sprayer, roller or brush.
Supplied concentrated. Mix 1 gallon Lithi-Tek 4500 with 1 gallon of distilled or deionized water.
Covers up to 750 square feet per concentrated gallon.
Product Details:
Surface Preparation: New “green” concrete must be properly cured. Concrete should obtain 80% of design strength, typically achieved within 28 days. The concrete substrate must be structurally sound and clean of oil, grease, dirt, wax, curing compounds, efflorescence, paints, previous sealers, adhesives and other contaminants that might interfere with the penetration of the sealer. Power wash, acid etch or mechanically scarify as necessary to achieve the desired surface condition. If acid was used to clean the concrete, neutralize the surface and rinse with water prior to application. Allow for proper dry time before application. The surface-zone moisture content of the concrete should not exceed 4% wt. Do not apply if standing water is visible. Surface and air temperatures must be at least 40°F during application. Surface and air temperatures should not exceed 95°F. Do not apply when temperatures are expected to fall below 32°F within 8 hours or when rain is expected within 12 hours following application. Keep material from freezing. If freezing conditions exist before application, let the substrate thaw before application. Do not apply during inclement weather or when inclement weather is expected within 12 hours. Crack, patching and expansion joint sealants can be applied after application; always test for compatibility and adhesion. Protect people, property, vehicles, window glass, roofing materials, plastic products, shrubbery, landscaping and all surfaces not set for treatment from overspray.
Application - Primer: Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection. Always mix the concentrate with 1 part water prior to application. Distilled water is recommended for maximum performance. Stir material throughly before and during application. One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate. Do not over apply. If applied too heavily, an unreacted white residue may develop on the surface. If it starts to rain, stop treatment and cover the treated areas.
Application (Polishing): Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection. Do not mix with water prior to application. Stir material throughly before and during application. One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate.
Dry Time: Typical drying time is 4-6 hours at 70°F and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time. Treated surfaces will be ready for pedestrian and vehicle traffic within 24 hours.
Clean Up: Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.
Precautions/Safety: Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.
Best Performance: Proper application is the responsibility of the user. Do not use on extremely porous concrete or masonry such as CMU block. Do not over apply. Sealer is highly reactive. Excess material may result in a a white residue or discoloration on the surface. Does not protect against equipment leaks such as oils and hydraulic fluids. Make sure the most current versions of product data sheets and SDS are being used.
Coverage: 1 coat: up to 750 square feet. Variations in texture and porosity of substrate may affect the coverage and performance of the product.
loading
